WD-300 Wooden Door Case Forming Machine
Details
Application Field:
Milling the edge lines, trimming lines, seal lines and all required edges on the wooden profile to form a side of a doorcase
Abilities:
- After sandwich door panel is producesd the side edge lines,trimming lines,rabbet edges and width can be cut witg 6-8 milling saws automatically.
- Produces 17sec. / m doorframe length.
- 2 vertical 2 horizontal motors
- Width adjusted manually
- 10-400mm frame width operation ability
- Rabbet edge height and trimming height can be adjusted.
- Upper clamp pressing system provides very strong holding
- PLC computer opreation
- 6 or 8 saws
Optional:
- Automatic width adjusting unit
- Emery ( Sandpapering) Unit
Technical Specifications
Cutting Motor Power : | 4 x 4 kW |
Reducter Motor Power : | 0.37 kW |
Press ure Unit Pressure : | 6 bar |
Min. Max. Cutting Width : | 100 – 400 mm |
Min. Max. Cutting Width : | 30 – 80 mm |
Voltage: | 380 V |
Air Pressure: | 6 bar |
Height: | 1600 mm |
Width: | 1500 mm |
Length: | 4200 mm (5200 mm with Sanding ) |
Weight: | 1250 kg |